Kemper Tools

Dipping tongs provide a quick method for glazing since ceramic pieces may be dipped directly into glaze.

Used to apply textures to small hard to get at areas. Stainless bristles and aluminum handle. 5 1/"L.

Used to trim the pour hole waste and to remove mold marks from cast greenware. 4 1/2" long blade.

Used to trim the pour hole waste and to remove mold marks from cast greenware, soft steel blade may be bent as desired 4 1/2" long blade.

Designed for cleaning and shaping fingers and hands of greenware. 4 1/2" long with a hardwood handle.

This finish rubber is molded from pliable rubber and kidney shaped. It is used for smoothing, shaping and finishing pottery pieces.

This finish rubber is molded from pliable rubber and kidney shaped. It is used for smoothing, shaping and finishing pottery pieces.

This finish rubber is molded from pliable rubber and kidney shaped. It is used for smoothing, shaping and finishing pottery pieces.

This finish rubber is molded from pliable rubber and kidney shaped. It is used for smoothing, shaping and finishing pottery pieces

Smooth, round hardwood roller 3 1/2" long. Rust resistant handle.

Flower petal cuppers, in a set of six sizes, are used to form various shapes and sizes of flowers petals. By holding a thin rolled layer of clay i...

Use on bisque or greenware, wood, polishes porcelain bisque, outlasts ordinary sandpaper, GSP has a Coarse, flexible & durable surface.

Use on bisque or greenware, wood, polishes porcelain bisque, outlasts ordinary sandpaper, GSF has a Fine, flexible & durable surface.

This tool has a heavy sharp needle set in a 1/2" diameter hardwood handle. Potters use this tool to cut through and remove the uneven top edge of w...

Special high-temperature alloy wire (HTW 17 gauge, HTS 24 gauge) can be used for any project that requires wire support in high temperatures of cer...

Special high-temperature alloy wire (HTW 17 gauge, HTS 24 gauge) can be used for any project that requires wire support in high temperatures of cer...

Designed especially for delicately detailed incising and excising work, this tool has been used as a lace draping and cleanup tool as well. The sha...

Heavy blunt needle-tear drop shaped stainless steel foot with flat, smooth bottom 6 3/4" overall length.

Precision hardened steel burr tips embedded in smooth hardwood handles. These tool are unsurpassed for intricate ceramic detail work, and are e...

Precision hardened steel burr tips embedded in smooth hardwood handles. These tool are unsurpassed for intricate ceramic detail work, and are exce...

Precision hardened steel burr tips embedded in smooth hardwood handles. These tool are unsurpassed for intricate ceramic detail work, and are e...

Used to carve minute details such as facial features, hair and jewelry on porcelain and ceramic figurines. Curved blades are precision ground to a...

Contains four leaf shaped cutters from 1" - 2" in length plus instructions. Used like cookie cutters to make leaf like clay forms or leaf like deta...

Turning tool is used by potters to accurately shape, contour and trim clay forms on the wheel. The heavy steel head is brazed to a steel shaft, pla...

(Includes MR1 - MR6)Just the answer for your fine sculpting, detailing, and trimming requirements. These miniature sculpting tools are made of fi n...

Used to trim excess clay from slip cast items before removing them from mold. Cutting blade is wood to prevent mold damage. Made of hardwood 8"L.

This tool is used for patching greenware. It is also used as a small palette knife. It contains two stainless steel blades. One is 1" and one is 1...

Plastic palette knife 3 1/2"

The pot lifts provide an easy method for removing pottery items from the throwing wheel without damage.  They are made fro rust-free, high strength...

A thin needle set in a hardwood handle. Used to cut through and remove the uneven top edge of thrown items. Tool is 5 1/2" L.

Contains all the basic pottery tools required for the professional as well as the beginner: loop tool, ribbon tool, potters rib, needle tool, wood ...

Pack of 5 replacement blades for #KEMUK.

Turning tools are used by potters to accurately shape, contour and trim clay forms on the wheel. The heavy steel head is brazed to a steel shaft, p...

Contains five round cutters from 1/2" to 1 1/2" dia. plus instructions. Used like cookie cutters to make round pads of clay, which are formed into ...

Removes seams & other marks from greenware or bisque. Tough, abrasive side for hard to remove marks. Soft, smooth foam side for gentle smoothin...

Makes the right size hole in greenware sale and pepper shakers. Double ended tool has smooth hardwood handle with high carbon steel drills.

For both sgraffito (scratch) work and clay lifting. Working end is steel scratch knife, handle is smooth plastic. 7 1/2" long.

This is a compact hand fitting sculpturing tool that duplicates thumb and finger strokes without abrasive wear on the sculptor's hands, fingers and...

Used to flow casting slips and glazes onto ceramic pieces in raised designs. Supplied with round and ribbon spouts plus caps.  4 ounce bottle.

Used to carve minute details such as facial features, hair and jewelry on porcelain and ceramic figurines. Curved blades are precision ground to sh...

Turning tools are used by potters to accurately shape, contour and trim clay forms on the wheel. The heavy steel heads are brazed to steel shafts, ...

Now you can spatter with no mess. This brush can give you a fine spray or cool paint on your favorite project. Simply point the bar toward the area...

6in x 2in

Excellent for tracing patterns onto greenware, for incising work and for stamping single dots of color onto ware.

Can be twirled between the palms or used egg beater style to mix stains, glazes and other mediums. Aluminum handle 6"L.

Used to apply texture to large areas of hard, dry greenware. Hardwood handle and brass ferrules. 6 1/2"L.

Used for slicing and cutting lump clay, or cutting pots or other items from the throwing head of the potters.

Contains a wire loop, sgraffito, clean-up tool, cut-out tool, palette knife, lace too, sabre saw, and a salt and pepper drill

Turning tools are used by potters to accurately shape, contour and trim clay forms on the wheel. The heavy steel head is brazed to a steel shaft, p...

Used for trimming greenware or cutting out designs from clay slabs or vessels. Stainless steel blade is very sharp and semi-flexible and is set in ...

Use it to smooth out a ragged line, get rid of an unwanted color and, in general, wipe out mistakes. The two silicone rubber tips are solvent-res...

Perfect for creating smooth furrows and variations of line width with a single stroke. Loops are high strength steel wire set in a hardwood handle ...

The Wire Stylus is a versatile tool for incising greenware. A small wire loop, firmly set in hardwood handle creates carious size furrows, dependi...