Kemper Tools

Dipping tongs provide a quick method for glazing since ceramic pieces may be dipped directly into glaze.

Sharp-ended for easy insertion in the kiln wall, these devices hold loose kiln elements in place. Made of a high temperature resistant alloy for te...

This 24 gague wire can be used to create hanging glass and ceramic projects.  Create loops in pendants, wall hangings, wind chimes, etc.  This wire...

Sharp-ended for easy insertion in the kiln wall, these devices hold loose kiln elements in place. Made of a high temperature resistant alloy for te...

Use on bisque or greenware, wood, polishes porcelain bisque, outlasts ordinary sandpaper, 2 sides - course & fine, flexible & durable

For cutting clean holes in wet thick-walled greenware and wheel thrown items. Cutting tubes are sharpened brass set in hardwood handles.

Makes the right size hole in greenware sale and pepper shakers. Double ended tool has smooth hardwood handle with high carbon steel drills.

Excellent for cutting holes in Christmas trees. The hole cutter has spring loaded ejector for removing any wet clay from tube. 1/4"

This finish rubber is molded from pliable rubber and kidney shaped. It is used for smoothing, shaping and finishing pottery pieces. Soft 3 1/8".

Use to cut through wet clay to make cut-out designs and openings. Tool is designed for thick wall greenware and pottery. Double edged blade set in ...

For cutting clean holes in wet thick-walled greenware and wheel thrown items. Cutting tubes are sharpened brass set in hardwood handles.

One flat, triangular blade and one curved, pointed blade. 3/8" diameter handle, 6 1/2" overall length.

4" Handle maker for mugs.

Used to apply textures to small hard to get at areas. Stainless bristles and aluminum handle. 5 1/"L.

Used for slicing and cutting lump clay, or cutting pots or other items from the throwing head of the potters.

Plastic palette knife 3 1/2"

Perfect for creating smooth furrows and variations of line width with a single stroke. Loops are high strength steel wire set in a hardwood handle ...

Excellent for tracing patterns onto greenware, for incising work and for stamping single dots of color onto ware.

For cutting clean holes in wet thick-walled greenware and wheel thrown items. Cutting tubes are sharpened brass set in hardwood handles.

Removes seams & other marks from greenware or bisque. Tough, abrasive side for hard to remove marks. Soft, smooth foam side for gentle smoothin...

3in x 3in x .5in

Precision hardened steel burr tips embedded in smooth hardwood handles. These tool are unsurpassed for intricate ceramic detail work, and are e...

Use to cut through wet clay to make cut-out designs and openings. Tool has a thin blade for delicate work. Double edge blade set in hardwood handle.

Contains a wire loop, sgraffito, clean-up tool, cut-out tool, palette knife, lace too, sabre saw, and a salt and pepper drill

4" Handle maker for pitchers.

This finish rubber is molded from pliable rubber and kidney shaped. It is used for smoothing, shaping and finishing pottery pieces. Hard 3 1/8"

Used to trim the pour hole waste and to remove mold marks from cast greenware. 4 1/2" long blade.

This is an all wood tool that is sharp and pointed on one end and square and flat on the other. It is used for modeling in soft clay, for cleaning...

Precision hardened steel burr tips embedded in smooth hardwood handles. These tool are unsurpassed for intricate ceramic detail work, and are e...

For cutting clean holes in wet thick-walled greenware and wheel thrown items. Cutting tubes are sharpened brass set in hardwood handles.

Contains all the basic pottery tools required for the professional as well as the beginner: loop tool, ribbon tool, potters rib, needle tool, wood ...

This finish rubber is molded from pliable rubber and kidney shaped. It is used for smoothing, shaping and finishing pottery pieces. Soft 4 1/4"

Used to flow casting slips and glazes onto ceramic pieces in raised designs. Supplied with round and ribbon spouts plus caps.  4 ounce bottle.

Smooth, round hardwood roller 3 1/2" long. Rust resistant handle.

Used to create a smooth sgraffito line. Each tool has a large and fine ball end of stainless steel set in a hardwood handle.  5 1/2" long.

Flower petal cuppers, in a set of six sizes, are used to form various shapes and sizes of flowers petals. By holding a thin rolled layer of clay i...

A thin needle set in a hardwood handle. Used to cut through and remove the uneven top edge of thrown items. Tool is 5 1/2" L.

This is a compact hand fitting sculpturing tool that duplicates thumb and finger strokes without abrasive wear on the sculptor's hands, fingers and...

The Wire Stylus is a versatile tool for incising greenware. A small wire loop, firmly set in hardwood handle creates carious size furrows, dependi...

Use it to smooth out a ragged line, get rid of an unwanted color and, in general, wipe out mistakes. The two silicone rubber tips are solvent-res...

The Kemper Klay Gun is designed extra large so fewer refills are required to complete a project. The klay gun is furnished with a set of 19 discs t...

Made of quality brass, designed with push out plunger to remove clay from tube.  Ideal for cutting out windows or just designs.

This set contains five 6" double wire end tools with a wide variety of shapes used to remove controlled amounts and shapes of clay.

This set contains five 8" double ended ribbon tools with a wide variety of shapes for medium duty clay cutting, shaping and slicing.

Loops tools are used to remove controlled amounts and shapes of clay from wheel thrown pieces and clay sculpture pieces. 3/4"

This tool has a heavy sharp needle set in a 1/2" diameter hardwood handle. Potters use this tool to cut through and remove the uneven top edge of w...

Can be twirled between the palms or used egg beater style to mix stains, glazes and other mediums. Aluminum handle 6"L.

Pack of 5 replacement blades for #KEMUK.

The pot lifts provide an easy method for removing pottery items from the throwing wheel without damage.  They are made fro rust-free, high strength...

Made of quality brass, designed with push out plunger to remove clay from tube. Ideal for cutting out windows or just designs.

Loops tools are used to remove controlled amounts and shapes of clay from wheel thrown pieces and clay sculpture pieces. 1 1/8"

Loops tools are used to remove controlled amounts and shapes of clay from wheel thrown pieces and clay sculpture pieces. 1 3/4"

10" Aluminum Caliper

8" Aluminum Caliper

This is a heavy duty knife made especially for trimming production quantities of pottery and ceramic pieces. The heavy steel file-hard blade is cap...

This is a basic kit for beginning ceramists. It includes the essentials needed to clean and finish greenware.