Clay & Ceramic Tools

The Giffin Grip Model 10 is the essential re-centering tool for potters. Designed specifically for trimming, it works equally well for waxing the f...

GG&MN - The new Giffin Grip Mini! All the quality and reliability you expect from the original Giffin Grip only smaller and packed with cool ne...

FS3 - The Flex Sliders are adjustable for off-centered, asymmetrical and plain old wonky pots. Use them just like the Basic Sliders to start and th...

BB3 - Plastic brackets for securing the Giffin Grip on your wheel head. (Set of 3)

OR2S3 - 2 O-rings for securing top and bottom plates together. Plus 3 shims to increase tightness between the plates. (Not for use with the Giffin ...

Make one measurement and you have its opposite immediately. The Lid Master does the work of two calipers with far greater speed and accuracy! Plus,...

LLM&L - Inside/outside measuring calipers for Potters. The Large Lid Master™ can measure pots up to 20”.

10" Aluminum Caliper

8" Aluminum Caliper

10½" Jiffy Mixer fits ¼"Drill. Use it for 1-2 gal. containers.

15" Jiffy Mixer Fits 1/4" Drill. Use for 1-2 gal. containers.

Made of 304 polished stainless steel, the PS-1 model is designed for heavy duty jobs in 5-10 gal. (20-40 qt.) containers. It easily fits any 1/2″ e...

ES Made of 304 polished stainless steel, the ES model is designed for medium to heavy jobs in 2-5 gal. (8-20 qt.) containers. It easily fits any 3/...

The pot lifts provide an easy method for removing pottery items from the throwing wheel without damage.  They are made fro rust-free, high strength...

Dipping tongs provide a quick method for glazing since ceramic pieces may be dipped directly into glaze.

5" Porcelain and greenware file, 2 sided white side for cleaning porcelain and maroon side for cleaning greenware.

Porcelain and greenware file, 2 sided white side for cleaning porcelain and maroon side for cleaning greenware. File, Woven 6-3/4"L x 3/4"W

This set contains five 6" double wire end tools with a wide variety of shapes used to remove controlled amounts and shapes of clay.

This set contains five 8" double ended ribbon tools with a wide variety of shapes for medium duty clay cutting, shaping and slicing.

Contains a wire loop, sgraffito, clean-up tool, cut-out tool, palette knife, lace too, sabre saw, and a salt and pepper drill

Contains all the basic pottery tools required for the professional as well as the beginner: loop tool, ribbon tool, potters rib, needle tool, wood ...

This is a basic kit for beginning ceramists. It includes the essentials needed to clean and finish greenware.

For cutting clean holes in wet thick-walled greenware and wheel thrown items. Cutting tubes are sharpened brass set in hardwood handles.

For cutting clean holes in wet thick-walled greenware and wheel thrown items. Cutting tubes are sharpened brass set in hardwood handles.

For cutting clean holes in wet thick-walled greenware and wheel thrown items. Cutting tubes are sharpened brass set in hardwood handles.

For cutting clean holes in wet thick-walled greenware and wheel thrown items. Cutting tubes are sharpened brass set in hardwood handles.

Excellent for cutting holes in Christmas trees. The hole cutter has spring loaded ejector for removing any wet clay from tube. 1/4"

Excellent for cutting holes in Christmas trees. The hole cutter has spring loaded ejector for removing any wet clay from tube. 3/16"

Made of quality brass, designed with push out plunger to remove clay from tube.  Ideal for cutting out windows or just designs.

Made of quality brass, designed with push out plunger to remove clay from tube. Ideal for cutting out windows or just designs.

Made of quality brass, designed with push out plunger to remove clay from tube.; Ideal for cutting out windows or just designs.

Made of quality brass, designed with push out plunger to remove clay from tube.; Ideal for cutting out windows or just designs.

Used for slicing and cutting lump clay, or cutting pots or other items from the throwing head of the potters.

Used for trimming greenware or cutting out designs from clay slabs or vessels. Stainless steel blade is very sharp and semi-flexible and is set in ...

Use to cut through wet clay to make cut-out designs and openings. Tool is designed for thick wall greenware and pottery. Double edged blade set in ...

This is a heavy duty knife made especially for trimming production quantities of pottery and ceramic pieces. The heavy steel file-hard blade is cap...

Used to trim excess clay from slip cast items before removing them from mold. Cutting blade is wood to prevent mold damage. Made of hardwood 8"L.

Used to trim the pour hole waste and to remove mold marks from cast greenware, soft steel blade may be bent as desired 4 1/2" long blade.

Used to trim the pour hole waste and to remove mold marks from cast greenware. 4 1/2" long blade.

Plastic palette knife 3 1/2"

Pack of 5 replacement blades for #KEMUK.

Loops tools are used to remove controlled amounts and shapes of clay from wheel thrown pieces and clay sculpture pieces. 1/2"

Loops tools are used to remove controlled amounts and shapes of clay from wheel thrown pieces and clay sculpture pieces. 3/4"

Loops tools are used to remove controlled amounts and shapes of clay from wheel thrown pieces and clay sculpture pieces. 1"

Loops tools are used to remove controlled amounts and shapes of clay from wheel thrown pieces and clay sculpture pieces. 1 1/8"

Loops tools are used to remove controlled amounts and shapes of clay from wheel thrown pieces and clay sculpture pieces. 1 1/4"

Loops tools are used to remove controlled amounts and shapes of clay from wheel thrown pieces and clay sculpture pieces. 1 3/4"

4" Handle maker for pitchers.

A high carbon steel blade, heat treated and sharpened, set in a smooth hardwood handle. The 1/4" blade is for drilling tree lights and jewelry sett...

4" Handle maker for mugs.

Use to cut through wet clay to make cut-out designs and openings. Tool has a thin blade for delicate work. Double edge blade set in hardwood handle.

Excellent for tracing patterns onto greenware, for incising work and for stamping single dots of color onto ware.

One flat, triangular blade and one curved, pointed blade. 3/8" diameter handle, 6 1/2" overall length.

Used to create a smooth sgraffito line. Each tool has a large and fine ball end of stainless steel set in a hardwood handle.  5 1/2" long.

Designed for cleaning and shaping fingers and hands of greenware. 4 1/2" long with a hardwood handle.

Perfect for creating smooth furrows and variations of line width with a single stroke. Loops are high strength steel wire set in a hardwood handle ...

Used to carve minute details such as facial features, hair and jewelry on porcelain and ceramic figurines. Curved blades are precision ground to sh...