Skutt Envirovent 2 Replacement Motor
Coming Soon
SKU SK2449
The EnviroVent 2 is a Downdraft Ventilation System designed to extract fumes from your electric kiln and vent them outdoors before they have a chance to enter the room. Because it is a DownDraft Ventilation System the EnviroVent 2 also improves the firing atmosphere in the kiln while it is protecting you from the odorous fumes that can be emitted from certain clay bodies and glazes when they are fired. Now you can vent 2 Kilns with one vent. The new 140 CFM Motor allows you to vent 2 kilns up to 12 Cubic Feet each, or one kiln between 12 and 24 Cubic Feet, with one Envirovent 2 Motor.
Envirovent is an effective kiln-venting system that draws out firing odors and vents them outdoors. The Envirovent creates a downdraft effect which improves firing consistency as well.
Compact and unobtrusive, the Envirovent can be attached to virtually any popular, multi-sided, electric kiln in minutes. The only modification required is the drilling of small holes in the kiln's lid and floor. Drill set is supplied.
Includes an integral blower unit in-line switch, 18" (46 cm) stainless steel exit duct, and installation and operating instructions. 3" (10 cm) rigid or flexible drier ducting (available at hardware stores) is recommended to vent to outdoors. However, a 3" to 4" adapter is included if you want to use 4" ducting. The 115V air-cooled motor is UL and CSA listed, and operates on 1.1A household current. It will not overheat or shut off due to firing heat. Limited two-year warranty. Weighs 25 lb (11.3 kg).
View or Download EnviroVent Manual Here
Envirovent is an effective kiln-venting system that draws out firing odors and vents them outdoors. The Envirovent creates a downdraft effect which improves firing consistency as well.
Compact and unobtrusive, the Envirovent can be attached to virtually any popular, multi-sided, electric kiln in minutes. The only modification required is the drilling of small holes in the kiln's lid and floor. Drill set is supplied.
Includes an integral blower unit in-line switch, 18" (46 cm) stainless steel exit duct, and installation and operating instructions. 3" (10 cm) rigid or flexible drier ducting (available at hardware stores) is recommended to vent to outdoors. However, a 3" to 4" adapter is included if you want to use 4" ducting. The 115V air-cooled motor is UL and CSA listed, and operates on 1.1A household current. It will not overheat or shut off due to firing heat. Limited two-year warranty. Weighs 25 lb (11.3 kg).
View or Download EnviroVent Manual Here