Access Denied
IMPORTANT! If you’re a store owner, please make sure you have Customer accounts enabled in your Store Admin, as you have customer based locks set up with EasyLockdown app. Enable Customer Accounts
Filters
Fired Color
Finding the right glaze has never been easier! Filter to shop by certification, brand, product family, hue, food safety, look, movement, firing cone and surface type, allowing you to select the perfect glaze for every project.
ACMI Certification - Toxicological evaluation
AP - The (Approved Product) This seal identifies products that are certified non-toxic. It means the product does not contain any materials in quantities that are harmful to human health.
CL - The (Cautionary Labeling) Seal identifies products that are certified to be properly labeled in a program of toxicological evaluation by the medical expert for any known health risk and with information on the safe and proper use of these materials. CL products are not suitable for children 12 and under.
Dinnerware Safe - Defines glaze ability to be used in contact with food
Yes - The fired glaze meets the FDA guidelines for food safety and is suitable for use on dinnerware.
Yes w/ Clear - The fired product meets the FDA guidelines for food safety and is suitable for use on dinnerware if a clear glaze is applied to create a sealed chemically durable finish.
No - The fired product is not safe for use on dinnerware.
Fired Look - Glaze appearance post firing
Opaque - Glaze that produces uniform, solid coverage and cannot be seen through
Translucent - Glaze that can be seen through and may create color variation over surface texture.
Semi-Opaque - Glaze that can be partially seen through and may create color variation over surface texture.
Breaking – Glaze color variation on highly textured areas and/or when applied in varied thickness.
Fired Movement - Glaze movement during firing
Fluid - Glaze that may flow especially on vertical surfaces.
Stable - Glaze with little to no movement.
Primary Firing Cone* - Lowest firing cone the glaze can be fired to
Cone 06 – Low-fire approximately 1828 ℉
Cone 06-6 – Low-fire to Mid-range approximately 1828 ℉ to 2232 ℉
Cone 6 - Mid-Range approximately 2232 ℉
*While most fired products are initially developed for use at the lowest firing cone, many colors perform well at higher temperatures. Testing is always recommended.
Surface Type - Glaze sheen and surface characteristics
Crackle - Glazes designed to craze and develop a fine crackle surface.
Crystal - Glazes that contain colorful crystals and add variation in color, finish and movement.
Gloss- Glazes have a shiny, reflective finish.
Matte - Glazes with a flat, non-reflective finish.
Specialty - Glazes consist of a variety of products that add a unique layer of visual interest.
Texture - Glazes that develop a dimensional surface.
Satin - Glazes with a low-sheen, velvety finish.
Default Size:
-
-
Sale
from $3.18| /EL1464 Rain Cloud
EL1464Cone 06 oxidation (large photo): Rain Cloud is a glossy, mottled light and dark gray glaze. Cone 6 oxidation (small photo): Color changes to a semi...
View full details -
Sale
$9.31| /FN0244 Gray
FN024PCone 06 oxidation (large photo): Produces a beautiful, smooth high gloss gray finish and can be intermixed for custom colors. Cone 6 oxidation (sma...
View full details$9.31| / -
Sale
$9.31| /FN0394 Light Gray
FN039PCone 06 oxidation (large photo): Produces a beautiful, smooth high gloss light gray finish and can be intermixed for custom colors. Cone 6 oxidatio...
View full details$9.31| / -
Sale
$9.31| /FN0464 Sage
FN046PCone 06 oxidation (large photo): Produces a beautiful, smooth high gloss sage finish and can be intermixed for custom colors. Cone 6 oxidation (sma...
View full details$9.31| / -
Sale
$9.31| /FN2204 Sooty Grey
FN220PCone 06 oxidation (large photo): This soft translucent grey glaze adds a tint of color to your work, allowing surface textures or design to show th...
View full details$9.31| / -
Sale
from $5.61| /SC0352 Gray Hare
SC0358Cone 06 oxidation (larger image): Gray Hare is a heavily pigmented, viscous Stroke & Coat®glaze that can be used for brush strokes or opaque co...
View full details -
Sale
from $2.28| /SC0602 Silver Lining
SC0602Cone 06 oxidation (larger image): Silvering Lining is a heavily pigmented, viscous Stroke & Coat®glaze that can be used for brush strokes or op...
View full details -
Sale
from $5.61| /SC0902 Elephant Ears
SC0908Cone 06 oxidation (larger image): Elephant Ears is a heavily pigmented, viscous Stroke & Coat®glaze that can be used for brush strokes or opaqu...
View full details -
Sale
from $5.61| /SC0912 Seabreeze
SC0918Cone 06 oxidation (larger image): Seabreeze is a heavily pigmented, viscous Stroke & Coat®glaze that can be used for brush strokes or opaque co...
View full details -
Sale
from $6.33| /SP2602 Speckled Silver Lining
SP2608Cone 06 oxidation (larger image): Speckled Silver Lining is a heavily pigmented, viscous Stroke & Coat® glaze with red and black specks that ca...
View full details -
Sale
$11.38| /SW137P Storm Gray
SW137PCone 6 oxidation (larger image): Storm Gray is designed to produce a medium gray to white variegation depending on application. One coat will produ...
View full details$11.38| / -
Sale
$10.17| /SW142P Gray Matte
SW142PCone 6: Gray Matte is formulated to produce a smooth matte surface. Light coats will allow clay body characteristics to appear through the glaze (e...
View full details$10.17| / -
Sale
$11.38| /SW143P Abalone
SW143PCase Pack 1 (Each Price $11.38)Cone 6 oxidation (larger image): Abalone is formulated to produce a breaking white and mauve semi-gloss glaze. Light applications will produce a mo...
View full details$11.38| / -
Sale
$11.38| /SW147P Moonscape
SW147PCone 6: Moonscape is formulated to produce a medium gray to white variegation mottled with black crystals. Light coats will produce a matte gray fi...
View full details$11.38| / -
Sale
$11.38| /SW255P Gray Opal
SW255PCone 6 oxidation (larger image): Gray Opal creates a transparent gloss finish. It deepens in color from one coat to three but surface decoration an...
View full details$11.38| / -
Sale
$11.38| /SW405P Light Magma (Pint)
SW405PCone 6 oxidation (larger image): Light Magma is a sand-colored, high-texture glaze that creates a rough, cratered surface. The thicker the applicat...
View full details$11.38| / -
Sale
from $2.89| /UG0532 Silver Grey
UG0532Cone 06 oxidation (large photo): Silver Grey will fire matte without addition of a clear glaze. To intensify color or for use on dinnerware, apply ...
View full details -
Sale
from $2.89| /UG1982 Dark Grey
UG1982Cone 06 oxidation (large photo): Dark Grey will fire matte without addition of a clear glaze. To intensify color or for use on dinnerware, apply cl...
View full details -
Sale
from $2.89| /UG2212 Cement
UG2212Cone 06 oxidation (large photo): Cement will fire matte without addition of a clear glaze. To intensify color or for use on dinnerware, apply clear...
View full details -
Sale
from $2.89| /UG2362 Grey
UG2362Cone 06 oxidation (large photo): Grey will fire matte without addition of a clear glaze. To intensify color or for use on dinnerware, apply clear o...
View full details -
Sale
$2.59| /EZ0471 Thundercloud Grey
EZ0471Duncan E-Z Stroke Translucent Underglazes' intense pigment allows for high definition and decoration on pieces. Create a watercolor effect with one...
View full details$2.59| / -
Sale
from $4.16| /CG10164 Asteroid
CG10164Mayco Jungle Gems are crystal glazes consisting of a base glaze with granules of contrasting glazes. During the firing, the crystals spread out to ...
View full details
Sort by
Invalid password
Enter