Finding the right glaze has never been easier! Filter to shop by certification, brand, product family, hue, food safety, look, movement, firing cone and surface type, allowing you to select the perfect glaze for every project.
ACMI Certification - Toxicological evaluation
AP - The (Approved Product) This seal identifies products that are certified non-toxic. It means the product does not contain any materials in quantities that are harmful to human health.
CL - The (Cautionary Labeling) Seal identifies products that are certified to be properly labeled in a program of toxicological evaluation by the medical expert for any known health risk and with information on the safe and proper use of these materials. CL products are not suitable for children 12 and under.
Dinnerware Safe - Defines glaze ability to be used in contact with food
Yes - The fired glaze meets the FDA guidelines for food safety and is suitable for use on dinnerware.
Yes w/ Clear - The fired product meets the FDA guidelines for food safety and is suitable for use on dinnerware if a clear glaze is applied to create a sealed chemically durable finish.
No - The fired product is not safe for use on dinnerware.
Fired Look - Glaze appearance post firing
Opaque - Glaze that produces uniform, solid coverage and cannot be seen through
Translucent - Glaze that can be seen through and may create color variation over surface texture.
Semi-Opaque - Glaze that can be partially seen through and may create color variation over surface texture.
Breaking – Glaze color variation on highly textured areas and/or when applied in varied thickness.
Fired Movement - Glaze movement during firing
Fluid - Glaze that may flow especially on vertical surfaces.
Stable - Glaze with little to no movement.
Primary Firing Cone* - Lowest firing cone the glaze can be fired to
Cone 06 – Low-fire approximately 1828 ℉
Cone 06-6 – Low-fire to Mid-range approximately 1828 ℉ to 2232 ℉
Cone 6 - Mid-Range approximately 2232 ℉
*While most fired products are initially developed for use at the lowest firing cone, many colors perform well at higher temperatures. Testing is always recommended.
Surface Type - Glaze sheen and surface characteristics
Crackle - Glazes designed to craze and develop a fine crackle surface.
Crystal - Glazes that contain colorful crystals and add variation in color, finish and movement.
Gloss- Glazes have a shiny, reflective finish.
Matte - Glazes with a flat, non-reflective finish.
Specialty - Glazes consist of a variety of products that add a unique layer of visual interest.
Texture - Glazes that develop a dimensional surface.
Satin - Glazes with a low-sheen, velvety finish.
Sale
Cone 06 oxidation (large photo): PC-601 Clear Cascade produces a more flowing effect and allows the color of the base glaze to show through. It can...
View full details
Sale
Cone 06 oxidation (large photo): PC-602 White Cascade intermingles with the other glazes being used, introducing pure white to the colors you are u...
View full details
Sale
Cone 06 oxidation (large photo): A black shattered pattern of raised, irregular chips will emerge. The underlying glaze will appear in the cracks. ...
View full details
Sale
Cone 06 oxidation (large photo): A white shattered pattern of raised, irregular chips will emerge. The underlying glaze will appear in the cracks. ...
View full details
Sale
Cone 06 oxidation (large photo): Creates a white, textured surface. Cone 6 oxidation (small photo): No change. Create fluffy, snow-like effec...
View full details
Sale
Cone 6 oxidation (larger image): Crackle White is a bright white gloss glaze that develops a fine crackle pattern. Works well on stoneware and porc...
View full details
Sale
Cone 6 oxidation (larger image): Fires to an opaque deep rust red with a slight sheen when applied fully concentrated. This product will leave red ...
View full details
Sale
Cone 6 oxidation (larger image): Fires to a warm metallic finish that breaks brown over texture. Can add mobility when layered with glaze(s). Cone ...
View full details
Sale
Cone 6 oxidation (larger image): Fires to a matte metallic finish that breaks green over texture. Can add mobility when layered with glaze(s). Cone...
View full details
Sale
Cone 6 oxidation (larger image): Copper Wash fires to a matte metallic finish that breaks green over texture. Can add mobility when layered with gl...
View full details
Sale
Cone 6: Light Flux is a translucent cream color when used alone. Cone 10: The increase in temperature will cause more movement. TIP: Chip shown ove...
View full details
Sale
Cone 6: Dark Flux is a translucent brown color when used alone. Cone 10: The increase in temperature will cause more movement. TIP: Chip shown over...
View full details
Sale
Cone 6 oxidation (larger image): White Mudcrack is a high-texture glaze that forms a raised, cracked surface. The thicker the application, the more...
View full details
Sale
Cone 6 oxidation (larger image): Black Mudcrack is a high-texture glaze that forms a raised, cracked surface. The thicker the application, the more...
View full details
Sale
Cone 6 oxidation (larger image): Light Magma is a sand-colored, high-texture glaze that creates a rough, cratered surface. The thicker the applicat...
View full details
Sale
Cone 6 oxidation (larger image): Dark Magma is a charcoal-colored, high-texture glaze that creates a rough, cratered surface. The thicker the appli...
View full details
Sale
Black Metallic creates a highly reflective, dark metallic finish following a proper Raku Firing. Due to the unpredictable nature of this firing tec...
View full details
Sale
Copper Metallic develops a glossy copper color with various iridescent shades. Due to the unpredictable nature of this firing technique, results wi...
View full details
Sale
White Crackle develops a fine crackle pattern over a white gloss surface following a proper Raku Firing. Due to the unpredictable nature of this fi...
View full details
Sale
Copper Penny develops a bright glossy copper finish with various iridescent shades of blue and purple following a proper raku firing. Due to the un...
View full details
Sale
Peacock Matte develops a matte copper color with various iridescent shades of blue and purple following a proper raku firing. Due to the unpredicta...
View full details
Sale
Oil Slick develops a mix of dark blue, green, and purple tones following a proper raku firing. Due to the unpredictable nature of this firing techn...
View full details
Sale
Cone 06 oxidation (large photo): Creates a white, textured surface with chartreuse and orange crystals. Cone 6 oxidation (small photo): No change. ...
View full details
Sale
Cone 06 oxidation (large photo): Creates a white, textured surface with purple and red crystals. Cone 6 oxidation (small photo): No change. Cone 10...
View full details
Sale
Cone 06 oxidation (large photo): Creates a white, textured surface with green and blue crystals. Cone 6 oxidation (small photo): No change. Cone 10...
View full details
Sale
Rapid Roll was designed as a quick and efficient way to apply glaze to the inside of the ware without thinning brushing glazes. Pour Rapid Roll int...
View full details
Sale
Rapid Roll was designed as a quick and efficient way to apply glaze to the inside of the ware without thinning brushing glazes. Pour Rapid Roll int...
View full details
